Mellanox Technologies MSX1024B-1BRS Installationsanleitung PDF herunterladen (Seite 12)

Mechanical Installation

Rev 1.0

Mellanox Technologies

The switch platform can be rack mounted and is designed for installation in a standard 19” rack.

The power side of the switch includes a hot-swap power supply module, a blank cover for an

optional second PS unit for redundancy, and 2 hot-swap fan trays. There are two possible air flow

directions. Be sure that the switch air flow direction is compatible with your system, rack, and PS

units. The connector side of the switch has the ports, system LEDs, and management connection

ports.

The switch platform contains auto-sensing 100 - 240 VAC connections for all possible PS units.

The installer should use a rack capable of supporting the mechanical and environmental charac-

teristics of a fully populated platform.

1.1.1 Installation Kits

There are two Installation kit options. One long and one short. Both the standard and the short

switches can be mounted using the long rail kit.

1.2 Package Contents

Before you install your new switch, unpack the system and check to make sure that all the parts

have been sent, check this against the parts list below. Check the parts for visible damage that

may have occurred during shipping.

The switch comes packed with the following items:

•1 X – switch

•1 X – installation kit

• X – power cable one for each PS unit – Type C13-C14

• A single power cord for each power supply unit can be ordered at no extra charge

•1 X – Harness

• HAR000028 – Harness RS232 2M cable – DB9 to RJ-45switches

•1 X – Quick Start Guide

•1 X – China RoHS statement

The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Take pre-

cautions to guarantee proper ventilation in order to maintain good airflow at ambient

temperature. Cable routing in particular should not impede the air exhaust from the

chassis.

Table 3 - Installation Kit According to Rack Size

Kit OPN Rack Size

MSX60-BKIT 40-60 cm deep

MSX60-SKIT 60-80 cm deep

If anything is damaged or missing, contact your customer representative immediately.

For customer support go to:



www.mellanox.com =>Support => Customer Support Portal Login

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

Keine Kommentare

Mellanox Technologies MSX1024B-1BRS Installationsanleitung Seite 12